• OPEN WINDOWS function
This option allows you to activate or deactivate the WINDOWS OPEN
function. Using the and buttons
OFF to deactivate. Once the desired option has been selected, press
to confirm and exit.
This function is activated when there is a drop of at least 4°C in the room
temperature within 30 minutes. This normally occurs when a window is
left open, allowing warm air to escape and wasting energy. If this occurs,
your product will automatically activate the Anti-freeze mode for 2 hours.
To deactivate this function, press the on/off button.
•
BOOST function for 2 hours
The 2 hour mode will override any other setting mode and will increase your
product to maximum power. You can choose to increase the maximum power
for 15 minutes, 30 minutes, 1 hour or 2 hours.
To set the 2 hour mode, make sure the icon
submenu and press the
Use the and button
press to confirm.
• Effective Power function
To check the Power status of your product, make sure the
icon is flashing in the 'Energy' submenu and press
the
button to access. This option shows on the display
the actual consumption time of the product and the total
time during which our product is connected to the mains.
After a few seconds without pressing any button, the
display will show the nominal power and the effective
power of the product. The effective power corresponds
to the average power value that our product actually
consumes during operation.
and
button to confirm.
and
to choose how long to boost your towel rail and
KYROS ELECTRIC TOWEL RAIL
, select ON to activate and
is highlighted in the 'Power'
EN
17