AYR 761 Manual Del Usuario página 17

7.
How to bind Doorbell to mobile phone
Step1:
On the mobile phone, open the APP, login to the account, click the "Add
device" button on the main interface of the APP (Figure1), the interface
(figure2) will pop up, select and click "Security & Video surveillance" in the
category bar on the left, end then select and click "Smart Doorbell" in the
category on the right.
Step 2:
Take out doorbell, remove the base, uncover the black silicone cap on the
back of the doorbell, turn on the power switch, press and hold the "reset"
button for 8 seconds, and then you will hear the prompt sound "System reset".
After 5 seconds, the doorbell restarts and enters the network configuration
state, you will hear the voice prompt "The camera is ready to pairing" (for
detailed operation, please refer to article 5 of this manual).
Step 3:
After hearing the prompt tone, confirm that the sdoorbell enters the network
configuration state, select and click "Make sure the indicator is flashing
quickly or a prompt tone in heard" on the APP (figure 3), and then click
"Next" to pop up a new interface (figure 5).
Step 4:
Input the WIFI user name and password in (figure 5), Note:
1- This doorbell only can be used on 2,4Ghz network. If your network is 5Ghz,
please, change it to 2.4Ghz.
18
1 2