Inserting The Sim Card - Keba KeContact M20 Manual De Configuración

Mounting and installation instructions
5.3

Inserting the SIM card

Information
The listed ESD notices must be observed (see
erwise, the product could be damaged. The product will be excluded from
warranty in case of non-compliance with the ESD notices.
The slot for the SIM card is located inside the KC-M20.
Tools required:
●
To insert a SIM card, proceed as follows:
1) Remove the lower housing cover by unscrewing the four screws.
2) Unscrew the screw on the circuit board.
3) Tilt the circuit board upward at an angle (1) and pull it out the front (2)
262
Phillips screwdriver (included in scope of delivery)
5.2 ESD information). Oth-
Configuration manual V1.01
© KEBA 2022
M20