Intelligent Control With Apple Homekit - smartmi P1 Manual De Usuario

Intelligent Control with Apple HomeKit

1
Open the Home app on your iPhone/iPad.
2
Tap "Add Accessory" and then scan the HomeKit setup code on the product sticker (two stickers on the device unit, see illustration),
or enter the eight-digit setup code above the HomeKit Setup Code. The device will then be linked to the Apple Home app.
The device can be linked to Smartmi Link after linking to HomeKit. Go to the Personal
Info page on Smartmi Link. Tap "HomeKit Info" and then link the HomeKit device as
prompted.
Devices linked to Smartmi Link can also be added to HomeKit. Go to the Device
Control page on Smartmi Link. Tap "Add to HomeKit" in "Settings" and then link the
device to HomeKit as prompted.
Note:
10
Please ensure that your Wi-Fi network is both
available and has Internet access. Place your
phone as close to this product as possible. (This
product does not support 5G networks).
To control this accessory which is compatible
with HomeKit, it is recommended to use iOS
13.0 or a later version.
Please keep the HomeKit setup code, as you
will need to scan the code to link the device to
HomeKit after a factory reset.
iPad and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Controlling this HomeKit-enabled accessory
automatically and away from home requires a
HomePod, Apple TV, or iPad set up as a home
hub. It is recommended that you update to the
latest software and operating system.
HomeKit Setup Code