Haverland TAC-0919 Manual De Instrucciones página 72

3. Lock the screw into the holes that correspond:
With the width that your window requires to ensure that there are no gaps or air pockets in
the window kit assembly after installation.
LOCATION
• The unit should be placed on a firm foundation to
minimize noise and vibration. For safe and secure
positioning. place the unit on a smooth, level floor strong
enough to support the unit.
• The unit has casters to aid placement, but it should only
be rolled on smooth, fiat surfaces. Use caution
when rolling on carpeted surfaces. Use caution and
Protect floors when rolling over wood floors. Do not
attempt to roll the unit over abjects.
• The unit must be placed within reach of a properly rated
grounded socket.
• Never place any obstacles around the air inlet or outlet
of the unit.
• Allow at least 45 cm of around and above space away
from the wall for efficient working.
• The hase can be extended, but it is the best to keep the length to minimum required. Also
make sure that the hase does not have any sharp bends or sags.