Filter Cleaning - Princess 01.368020.01.001 Manual Del Usuario

Instruction manual
• Gently press on the sides of the tank and pull the tank out with
both hands.
• Empty the water tank above a sink.
• Do not remove the float from the water tank, otherwise the water
sensor cannot detect the water level, causing the unit to
malfunction.
• If the tank is dirty, use water for cleaning. Do not use gasoline or
other chemicals, because it may damage the water tank and
cause water leakage.
• Press the tank tightly with both hands to put it into place.
• If the water tank is not positioned correctly, the full water sensor
will remain active and the dehumidifier will not work.
10
CONTINUOUS WATER DRAINAGE
• The unit features a continuous drainage port. Using a plastic pipe
(with an inner diameter of 10mm). Take out the water tank and
put the drainpipe over the water outlet of the unit. Put the water
tank back in place and guide the drainpipe through the hole of the
water tank. The water in the drainage tank can be continuously
drained out from the continuous port on the unit.

FILTER CLEANING

• Take the filter out of the unit.
• Clean the filter using a vacuum cleaner to gently absorb dust on
the filter screen surface.
• Use some warm water and a mild detergent if it is very dirty.
Make sure the filter is completely dry before you put it back.