EINHELL TC-CS 1410 Manual De Instrucciones Original página 28

Ocultar thumbs Ver también para TC-CS 1410:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

tool could cause injuries.
e) Avoid abnormal working postures. Make
sure you stand squarely and keep your
balance at all times. This will enable you to
control the power tool better in unexpected
situations.
f)
Wear suitable clothes. Never wear loose
fitting clothes or jewelry. Keep hair and
clothing away from moving parts. Loose
clothing, jewelry or long hair can be caught by
moving parts.
g) If dust extraction devices and dust coll-
ection devices can be fitted, they must be
connected and must be used correctly.
The use of a dust extractor can reduce the
dangers posed by dust.
h) Do not allow yourself to be lulled into a
false sense of security and do not ignore
the safety regulations covering electric
power tools, even if you are familiar with
the power tool after having used it many
times. Carelessness can lead to serious inju-
ries in just a fraction of a second.
4. Using and handling the power tool
a) Do not overload your power tool. Use the
correct electric tool for the job in hand.
The correct tool will enable you to work better
and more safely within the specific perfor-
mance range.
b) Do not use an electric power tool if the
switch is defective. An electric power tool
that cannot be switched on or off is dange-
rous and must be repaired.
c) Pull the plug out of the socket and/or
remove the removable battery pack be-
fore making any adjustments to the tool,
changing plug-in tool parts or putting the
power tool down. These precautions will
prevent the power tool starting accidentally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the power tool
or who have not read these instructions
to use the power tool. Electric tools are
dangerous if they are used by inexperienced
people.
e) Look after power tools and plug-in tools
with care. Check that moving parts
function correctly and do not jam, and
whether any parts are broken or dama-
ged such that they adversely affect the
function of the power tool. Have damaged
parts repaired before you use the power
Anl_SA_TC_CS_1410_SPK8.indb 28
Anl_SA_TC_CS_1410_SPK8.indb 28
GB
tool. Many accidents are caused by poorly
maintained electric tools.
f)
Keep cutting tools sharp and clean. Ca-
refully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Use the power tool, plug-in tools, etc.
as set out in these instructions. Take ac-
count of the conditions in your work area
and the job in hand. Using electric tools for
purposes other than the one for which they
are designed can result in dangerous situa-
tions.
h) Keep the handles and grip surfaces dry,
clean and free from oil and grease. If the
handles and grip surfaces are slippery, it will
not be possible to operate and control the
power tool safely in unforeseen situations.
5. Service
a) Have your power tool repaired only by
trained personnel using only genuine
spare parts. This will ensure that your power
tool remains safe to use.
Safety instructions for all saws
Sawing process
Danger:
a) Do not reach into the sawing area or
touch the saw blade. Hold the additional
handle or the motor casing with your
other hand. If you hold the saw in both
hands, they cannot be injured by the saw bla-
de.
b) Do not reach under the workpiece. The
guard hood cannot protect you from the saw
blade under the workpiece.
c) Adjust the cutting depth to the thickness
of the workpiece. Less than one full tooth
height should be visible under the workpiece.
d) Never hold the workpiece you wish to
saw in your hand or on your leg. Secure
the workpiece on a sturdy mount. It is im-
portant that you secure the workpiece well to
minimize the danger of body contact, the saw
blade jamming or loss of control.
e) Hold the electric power tool by the insu-
lated handles when carrying out work
during which the plug-in tool could strike
concealed power cables or its own pow-
er cable. Contact with a live cable will also
make the metal parts of the power tool live
and will cause an electric shock.
f)
Always use a stop or a straight edge when
carrying out longitudinal cuts. This will
- 28 -
02.12.2021 15:27:08
02.12.2021 15:27:08

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

4331052

Tabla de contenido