4
Installation Instructions
Kindly consider the suitable mode of power for your home before
installing the doorbell.
Mode 1
Battery Installation
1.
Mark screws position
on the wall using the
mounting bracket as
a template.
4. Install the doorbell
into the mounting
bracket.
Mode 2
AC Installation
1.
Mark screws position
on the wall using the
mounting bracket as
a template.
2. Drill holes on the
wall with an electric
drill, then insert the
provided nail
expansion screw.
5. Secure with a screw
and tighten with a
screwdriver.
2. Drill holes on the
wall with an electric
drill, then insert the
nail expansion
screws provided.
7
tape
or
tape
3. Fix the mounting
bracket with the
provided screws or
tape (No need for
screws if using tape).
12-24V AC
3. Connect the wire and
tighten with a
screwdriver.
Be careful
with the
power!