Care And Maintenance; Replacing The Light Bulbs; Tools Required For Assembly - Twin-Star International ChimneyFree 18EF010GAA Manual

CARE AND MAINTENANCE

REPLACING THE LIGHT BULBS

Tools Required for Assembly

Phillips Head Screwdriver
1
2 Screws
2
2
3
Wooden Ember Nuts
A119
All manuals and user guides at all-guides.com
Clear, 40-watt, E12 socket base light bulb
1. Turn the master power switch off, then unplug
2. Carefully tilt front frame assembly forward a couple
of inches. Then lift complete glass assembly up and
away from unit (Fig. 2).
2
3. Locate the two ember bed securing nuts on the left
6
(candelabra base, B bulb)
2 bulbs per fireplace
the power cord from the wall outlet.
If fireplace has been operating, let the unit cool
at least one hour.
Locate and rotate the 2 screws on the front frame
assembly in counterclockwise direction to loosen
the front frame assembly from insert. (Fig. 1).
and right sides of the log set. These securing nuts
are disguised as wooden embers (Fig. 3).
www.tsicustomerservice.com