Care And Maintenance - Twin-Star International 73719/23MM6072VMA Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE AND MAINTENANCE

• Dust your fi replace regularly with a soft non-lint producing cloth or household
dusting product.
• Clean your fi replace with a gentle non-abrasive household cleaner. Make sure
to dry your fi replace immediately with a soft cloth or towel.
• Tips for using touch-up pen (ZZ): For scratches, stroke in direction of scratch. For worn areas,
stroke in direction of wood grain. Rub excess colorant promptly with a soft cloth.
• The motors used on the fan and the fl ame generator assembly are pre-lubricated for extended bearing
life and require no further lubrication. However, we recommend periodic cleaning/vacuuming of the
fan/heater.
• Make sure the unit is turned OFF and unplugged whenever you are cleaning the heater or fi replace.
WARNING: Make sure the power is turned off before proceeding. Any electrical repairs
or rewiring of this unit should be carried out by a licensed electrician in accordance with
national and local codes.
If repairing or replacing any electrical component or wiring, the original wire routing,
color coding and securing locations must be followed.
WARNING: Electrical outlet wiring must comply with local building codes and other
applicable regulations to reduce the risk of fi re, electrical shock and injury to persons.
WARNING: Do not use this fi replace if any part of it has been under water. Immediately
call a qualifi ed service technician to inspect the fi replace and replace any part of the
electrical system.
WARNING: Disconnect power before attempting any maintenance or cleaning to reduce
the risk of fi re, electrical shock or personal injury.
WARNING: During any service of this appliance, the power to the unit must be turned off.
First turn the main power switch to the OFF position. Then remove the electrical plug from
the wall outlet.
13

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido