Cleaning And Maintenance - Gude OR 1500-7 Traducción Del Manual Original

Troubleshooting
Problem Cause
Device has no
power supply
Device without
function
The device is
faulty
A too low
temperature has
been set
Device does not
heat up
AUTO ON
accidentally
programmed
Thermal fuse
has been trig-
gered
The room temp.
is above the
temp set on the
thermostat.
The overheating
protection has
Device switches been triggered
off during
operation
The safety
switch/tilt
protection has
been triggered
AUTO ON or
AUTO OFF has
been triggered

Cleaning and maintenance

Solution
Danger:
Electric shock and/or fire!
Check the
Before cleaning, always switch off the device, pull
outlet
out the mains plug and let the device cool down.
Plug in the
Never put/immerse the device in water for
mains plug
cleaning, as this could lead to an electric shock
correctly
or fire.
Check the
building fuse
Contact custo-
Note:
mer service or
Do not use wire brushes or other sharp-edged or
a professional
abrasive objects for cleaning.
Do not use caustic/abrasive cleaning agents.
Set a higher
temperature
· Use a dry cloth to remove dust from the device.
Turn on the · A slightly damp cloth can be used to remove
stains.
device directly
Repair work and work not described in these instruc-
Contact custo-
tions may only be carried out by qualified and skilled
mer service
personnel. Only use original accessories and original
spare parts. Always keep the device, especially the
Increase
ventilation slots, clean.
thermostat
The oil-filled radiator is filled with a precisely adjusted
temperature
amount of special oil. Repairs that require opening
the device are reserved exclusively to the manu-
Switch off the
facturer or their customer service. Any leaks must
device and pull
be reported immediately to the manufacturer or its
out the power
customer service.
plug.
Eliminate
the cause of
Storage
the overhe-
ating before
restarting the
Warning:
device.
Risk of burns!
Make sure that
Switch off the device and let it cool down before
the device is
storage.
positioned
vertically and
· Clean the device (see chapter Cleaning), let it
is not subject
dry and store it in the original packaging.
to extreme
inclination.
· Store the device in a well-ventilated and dry
place out of the reach of children.
Check the
AUTO ON and
· Always wind up the power cord in the space
AUTO OFF provided for this purpose on the front of the
settings device.
ENGLISH
27