Pioneer FH-P6600R Manual De Operación página 50

Using the Digital Signal Processor (DSP)
2. Recall the Equalizer curve you want to adjust (refer to previous section).
3. Adjust the Equalizer curve.
Display shows "+6" – "–5".
Note:
• Adjustment range is subject to the curve.
• You can store the equalizer curve in CUSTOM by pressing button 5 for 2 seconds.
7 11-Band Graphic Equalizer Adjustment
You can select this mode only when you select CUSTOM.
1. Recall CUSTOM. (Refer to previous section.)
2. Press the DSP button and select the 11-Band Graphic Equalizer Adjustment
mode (50Hz) in the DSP Menu 1.
3. Select the band to be adjusted
with the 2/3 buttons.
50 Ô 80 Ô 160 Ô 250 Ô 500
Ô 800 Ô 1.2k Ô 2.5k Ô 4.0k
Ô 8.0k Ô 12.5k (Hz)
4. Adjust the level with the 5/∞
buttons.
Display shows "+6" – "–6".
Note:
• Adjustment range is subject to the curve.
5. Repeat steps 3-4 above for the other band adjustments.
Note:
• You can create different CUSTOM for different sources. (The Built-in CD Player and Multi-CD
Player are set to the same Equalizer Adjustment setting automatically.)
49
All manuals and user guides at all-guides.com