MPM MGO-20M Instrucciones De Funcionamiento página 11

APPLIANCE DESCRIPTION
1
3
4
1.
Red caution lamp (power supply)
2.
Green caution lamp (thermostat)
3.
Upper cover
PRIOR TO THE FIRST USE:
ATTENTION! Before cleaning the heating plates make sure the appliance is unplugged!
1. Prior to the first use of the roaster, thoroughly wash the heating panels of the wafflemaker
with the cloth moistened with warm water and thoroughly wipe with dry cloth thereafter.
2. Stand the appliance on a flat, stable and dry surface which is resistant to high temperatures.
NOTE! The working surfaces of the wafflemaker are heated up to extremely high temperatures! Touch the hold-
ers only!
USE OF THE WAFFLEMAKER
NOTE! When opening the cover, proceed carefully owing to hot damp from the area under the heating panels!
1. Oil the heating plates (5) with butter, margarine or other fat.
2. Insert the plug into the socket – red caution lamp (power supply) (1) and green caution lamp
(thermostat) (2) will go on. Close the cover of the appliance (3).
3. Prepare the dough for waffles.
4. When the green indicator lamp (2) will go off, open the cover by pulling the latch (4) and
carefully pour the dough for waffles on the heating panels. Gently close the cover and clamp
with clip (4). Make sure the amount of dough is correct. Too much dough may flow out of the
appliance caus ing impurities.
5. When checking the condition of waffles in course of their roasting, open the cover carefully
owing to hot damp escaping from the both sides of the roaster!
6. Open the cover and remove roasted waffles using wooden or plastic spatula.
2
5
4.
Clip
5.
Heating panel
11