Alpen Optics APEX THERMAL 54 Manual De Instrucciones página 11

18. Screen brightness
Here you can adjust the screen brightness. If
you prefer a less bright setting at night or in
poor lighting conditions, change the brightness
preferably here.
19. Information about the system
The user can get the current version in the system
information. The f menu under System->About
displays the following items:
• Hardware version
• Software version
• Sensor resolution
20. Factory provision
Select menu->System->Reset to reset the device to
factory settings.
Then select Yes or No. After rebooting the factory
settings, the image is restarted in the original
delivered status.
21. rechargeable battery
If the indicator is red, it means that the battery is
insufficiently supplied. The battery is designed for
500 charging cycles. You can charge with the AC
adapter or any other USB power source. Mobile
also with a power bank (USB). When charging via
USB-C, the LED shows red. A flash additionally
appears in the battery symbol of the device.
US/GB
DE
FR
ES
NL
IT
PL
www.alpenoptics.de www.alpenoptics.de
11 11