Setting Up Wireless Loadbars - Gallagher G060 Instrucciones Para La Instalación

SETTING UP WIRELESS LOADBARS

Important: Before you install your wireless loadbars, the wireless loadbar modules
must be connected to the loadbars and turned on.
1. Remove the protective cover from the end of the connector plug extending
from one end of each loadbar.
2. Plug each orange wireless loadbar module into the extending connector
plug.
3. Remove the protection tape from the slide switch.
4. Turn each module on, by sliding the black switch (on the top of the module).
Note: Switching on the loadbar module is only done once in the life of the
product.
5. Slide the wireless module into the loadbar until it clicks into place.
The wireless load bars are now ready for operation with:


6. Go to Installing the Load Bars (p 4) for information on how to mount the
loadbars on a platform.
Page 2
the Gallagher Animal Performance app on your mobile device, or
the Gallagher TW range of scales.
3E1045 Gallagher Loadbar User Manual