Installation - Defiant MSH27920DLWDF Guía De Uso Y Cuidado

installation

1
Mounting the coverplate
□
Line up the holes on the mounting bracket
(AA) with the holes on your junction box. Using
either (2) #6 screws (CC) or (2) #8 screws
(DD) (depending on size of the holes in your
junction box), attach the mounting bracket
(AA) to your junction box.
WarninG: Risk of electric shock. Disconnect power at
fuse or circuit breaker before installing or servicing.
AA
CC
or
DD
3
Mounting the fixture
□
Attach fixture (A) to the mounting bracket (AA)
using (2) #8 x 1-1/4 in. screws (FF) provided.
Be sure no loose wires remain sticking out
from underneath the coverplate. Insert the
decorative screw cover caps (GG) into the
screw holes on the coverplate for a finished
appearance.
□
Apply silicone caulk around the edges of the
coverplate to provide a watertight seal from
rain and moisture.
□
Turn on power at the main fuse/ breaker box.
2
Wiring the fixture
□
Thread fixture wires through coverplate
gasket (BB).
□
Connect fixture black wire to house black wire
and fixture white wire to house white wire
using wire nuts (EE) provided.
□
Connect house ground wire and fixture ground
wire to the mounting bracket (AA) using the
green ground screw on the mounting bracket.
Junction
box
7
Please contact 1-866-308-3976 for further assistance.
AA
EE
BB
Junction
box
EE
EE
A
A
FF
GG
HOMEDEPOT.com