Shark STRATOS HZ3000 Serie Guia Del Usuario página 3

(Click)
1. Insert Wand into Floor Nozzle.
3
(Snap)
3. Snap the Onboard Storage Clip onto the
wand, then place accessories in the holder.
Ensure all connections click securely into place.
5. Remove Odor Neutralizer Technology
Dial from bag. Flip up the dial handle, align
the teal arrows, then insert the dial into the
nozzle.
* More detailed odor neutralizer technology assembly instructions and visuals on the following
two pages.
s h a r kc l e a n . c o m
ASSEMBLY
1
(Click)
2. Insert Handheld Vacuum into wand.
4. For compact storage, hang the handheld
vacuum from the Storage Hook on the wand.
5
(Turn to
Click)
6. To lock and engage the dial, rotate it
counterclockwise until it clicks into the
desired odor intensity setting.
2
CONTROLS
The control panel is located on the
back of the handheld vacuum.
4
BARE FLOOR SETTING
6
Bare Floor/Small Area Rugs
When powered on, the vacuum will
be in Bare Floor setting. In this setting,
the brushrolls spin slowly to clean bare
floors and small area rugs.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use the Carpet setting.
NOTE: Select Carpet for stuck-on dust and debris.
SETTINGS
POWER BUTTON
Power Button
Press the Power button to begin
vacuuming. Press again to turn
off power. Press the FLOOR TYPE
button to toggle between Bare
Floor and Carpet settings.
CARPET SETTING
Carpet
Press the FLOOR TYPE button to
switch to Carpet setting. The brushrolls
spin faster to pick up debris below the
surface of your carpets.
s h a r kc l e a n . c o m