Intended Use; Safety Instructions - Black and Decker GPC1800 Manual De Instrucciones

ENGLISH
(Original instructions)

Intended use

Your Black & Decker cordless pole pruner has
been designed for pruning trees. This tool is
intended for consumer use only.
Your Black & Decker charger has been designed
for charging Black & Decker batteries of the type
supplied with this tool.

Safety instructions

General power tool safety warnings
@
Warning! Read all safety warnings
and all instructions.
Failure to follow the warnings and
instructions listed below may result in
electric shock, fire and/or serious injury..
Save all warnings and instructions for future
reference.
The term "power tool" in all of the warnings listed
below refers to your mains operated (corded)
power tool or battery operated (cordless) power
tool.
Work area safety
• Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
• Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
4
All manuals and user guides at all-guides.com
• Do not abuse the cord. Never use the cord
• When operating a power tool outdoors,
• If operating a power tool in a damp location
Personal safety
• Stay alert, watch what you are doing and
• Use personal protective equipment. Always
• Prevent unintentional starting. Ensure the
• Remove any adjusting key or wrench before
• Do not overreach. Keep proper footing
• Dress properly. Do not wear loose clothing
• If devices are provided for the connection
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
switch is in the off-position before connect-
ing to power source and/or battery pack,
picking up or carrying the tool. Carrying
power tools with your finger on the switch or
energising power tools that have the switch on
invites accidents.
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
and balance at all times. This enables
better control of the power tool in unexpected
situations.
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.