Jimmy H9 Flex Manual De Instrucciones página 8

Charging of vacuum cleaner
When the vacuum cleaner power is insufficient, charge the vacuum cleaner in time ; When the
voltage is too low, to protect the battery, vacuum cleaner will be automatic power-off, at this time
the vacuum cleaner need to be charged. When charging, plug the charger connector into the A/
C power socket, hang the handheld vacuum cleaner on the holder to start charging. When the
handheld vacuum cleaner LED display shows an increase in power, it indicates that the vacuum
cleaner is charging. When charging is completed, LED display show 100% power.
Attention: When battery power is below ≤20%, if product is working in Max mode , it will change to Eco mode
automatically. When battery power runs off, product will turn off automatically.
Attention: If vacuum cleaner is long idled, charge the battery every three months to avoid battery failure.
After charging, please pull the charger plug off power socket and stop charging.
Attention: if power cord is damaged, to avoid danger, it must be replaced by professional staff of the manufacturer,
repairing agent or similar department.
Use of handheld vacuum and LED screen contents
Take the vacuum cleaner off the storage holder,
press the on/off button to start or stop the vacuum
cleaner. Mode button can adjust working mode.
When machine is turned on, it works in Auto mode,
press the mode button to switch to the sequence
of Turbo- Max - Eco-Auto mode. During mode
switch the mode will be displayed in LED screen.
Middle of LED screen displays product run time
left in current mode. When mode is changed, left
run time will also change accordingly.
When product works in Max mode and battery
power drops below 20%, to extend product run
time, product will automatically switch from Max to
Eco mode. After battery is charged to higher than
20% power, product can work in Max mode.
When the product is working in Auto mode, it will
adjust working power basing on the dust content
and the floor type it detects, in order to achieve
higher cleaning efficiency. Under Auto mode,
LED screen display Auto regardless how high the
working power is.
6
5
Switch button
6
On/off button
LED screen
Dust release button
Battery pack
release button