4.
Stopping the generating set
1
Remove the connectors of all electric
equipment from the generating set panel.
WARNING
NEVER stop the engine with electrical
devices connected and running.
2
Turn the combination switch to the "stop"
position, the generator stops operation.
Wireless remote shutdown
(if applicable)
Press and hold the "OFF" button for at least 0.3
seconds to stop the generator. After the
generator stops, turn the combination switch to
the "stop" position.
Note: When the control distance is shortened or
the indicator light is on but the remote control
function is not available, Wireless remote
replace the battery. Contact your local dealer
for more information.
One-button start-stop
(if applicable)
Press the start-stop button to turn off the generator.
After the generator shutdown, turn the combination
switch to "stop" position.
If the generator will not be used for a long time,
please turn the combination switch to the "off"
position. After the fuel in the carburetor oil cup to
runs out and the generator automatically shuts
down, turn the knob to the "stop" position. If the
combination switch knob is not turned to the "stop"
position, there is a risk of fuel leakage. And the
battery will be undercharged after a long time
placed, resulting in failure to start the generator.
23
WARNING