Limited Warranty; End Of Product Life; Troubleshooting - TSI ML-0051 Manual Del Operador

8.2 LIMITED WARRANTY

Your LED light source carries a 3-year warranty from the date of shipment on workmanship
and all defects of material. Should your product prove to have such defects within three
year of the shipment, TeDan Surgical will repair or replace the product or component part
without charge.
warranty, please contact TeDan Surgical for return authorization documentation. You
should carefully pack unit in a sturdy carton and ship it to the factory. Please include a note
describing the defects, your name, telephone number and a return address. Warranty does
not cover equipment subject to misuse, accidental damage, normal wear and tear or if
transferred to a new owner without authorization from TeDan Surgical. This warranty gives
you specific legal rights and you may also have other rights that vary from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to
the factory. Your product will be inspected and an estimate of repair charges will be submitted
to you for approval. Payment must be received before repairs are completed.
• In the US:
• FAX number:
• e-mail:
10.

END OF PRODUCT LIFE

In accordance with the European Waste from Electrical and Electronic Equipment (WEEE)
directive, we encourage our customers to recycle this product whenever possible. Disposal
of this unit must be performed in accordance with the applicable local environmental
regulations.
In the US a list of recyclers in your area can be found at: http:/www.eiae.org/.
End users should contact their local distributor for disposal, collection and recycling options
and terms and conditions in your country
11.

TROUBLESHOOTING

Problem
The power indicator (refer to
4.1) is not lit.
The power indicator is lit, but
lamp will not ignite.
LIT-168 TeDan Surgical - ML-0051
Rev. G
Should your LED Light Source product(s) need servicing under this
.
Solution
A. Check that the AC power cord is properly
connected.
B. Check the unit fuses. If necessary, replace.
Turn intensity control knob clockwise to increase light output
intensity
Page 11 of 60
713-726-0886
713-726-0846
Sales@tedansurgical.com
(English)