Menu Options; Menu Selections; Recall Of Stored Data; Transmitting Stored Data - Orbeco HELLIGE SC450 Manual De Instrucciones

Ocultar thumbs Ver también para HELLIGE SC450:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Menu options

Menu selections

Mode
Press the [MODE] key and hold.
Turn the unit on using the [ON/OFF] key.
On
Allow the 3 decimal points to be displayed before releasing the
Off
[MODE] key.
!
The [!] key allows for selection of the following menu points:
1
Store
Date
Print
Time
1
2
1
Cal
2 3
Cal
Store
Date
Print
Time
diS
1
After confirming the selection with the [MODE] key the photometer
shows the last 16 data sets in the following format (automatically
Mode
proceeds every 3 seconds until result is displayed):
Number
Year
Date
Time
Test
Result
Zero
Test
The [ZERO/TEST] key repeats the current data set.
Mode
The [MODE] key scrolls through all stored data sets.
!
Quit the menu by pressing [!] key.
Store
Date
Print
Time
Prt
1
Note: To print data, or to transmit to a PC, the optional IRiM (Infrared
Interface Module) is required.
The IRiM Module and the connected printer/PC must be ready. Press
the [MODE] key to start the transmitting, the instrument displays
"PrtG" (Printing) for approx. 1 second followed by the number of the
first data set and its transmission. All data sets will be transmitted one
after the other. After finishing the instrument returns to test mode.
PrtG
The print job can be cancelled by pressing the [On/Off] key. The
instrument turns off.
On
Off
If the instrument is not able to communicate with the IRiM, a timeout
14
All manuals and user guides at all-guides.com
diS recall stored data
Prt printing stored data
setting the date and time
user calibration
diS – Recall of stored data
1
n xx (xx: 16...1)
YYYY (e.g. 2010)
mm.dd (monthmonth:dayday)
hh:mm (hourhour:minuteminute)
Method
x,xx
Prt – Transmitting stored data (to Printer or PC)
1
SC450_V1_04/2011

Publicidad

Tabla de contenido
loading

Tabla de contenido