Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GWS 18V-15 C Manual Original

move freely. Carry out a test run for at least one
minute with no load. Do not use abrasive tools that are
Status indicators
Battery charge indicator Meaning/cause
(user interface) (37)
Green Battery charged
Yellow Battery almost empty
Red Battery empty
Power tool status Meaning/cause
indicator (42)
Green Status OK
Yellow Critical temperature has been reached or bat-
tery is almost empty
Illuminated red Power tool has overheated or battery is empty Allow the power tool to cool down, or replace
Flashing red Kickback shutdown, restart protection or im-
pact shutdown has been triggered
Flashing blue Power tool is connected to a mobile device or
settings are being transferred
Temperature indicator (43) Meaning/cause
Yellow Critical temperature has been reached (mo-
tor, electronics, battery)
Red Power tool is overheated and will switch off
Smartphone symbol (41) Meaning/cause
− Further information can be found under the "Power tool status" display on a mobile device if it
is connected via Bluetooth® wireless technology.
Connectivity functions
In conjunction with the Bluetooth® Low Energy Module
GCY 42, the following connectivity functions are available
for the power tool:
– Registration and personalisation
– Status check, output of warning messages
– General information and settings
– Management
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 42.
The connection of the power tool with the app must be con-
firmed by pressing the speed preselection button (39) on
the user interface (4). The app requests this when connect-
ing.

Maintenance and Service

Maintenance and Cleaning

Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
Bosch Power Tools
damaged, run untrue or vibrate during use. Damaged
abrasive tools can burst apart and cause injuries.
Solution
–
Replace or charge battery soon
Replace or charge battery
Solution
–
Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
or charge the battery
Turn the power tool off and on again
–
Solution
Run the power tool at no load and allow it to
cool down
Leave the power tool to cool down
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
Store and handle the accessories carefully.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
English | 39
1 609 92A 6WP | (08.06.2022)