Storage; Disposal/Environmental Protection; Replacement Parts/Accessories - Parkside PDTA 5 A1 Traducción Del Manual De Instrucciones Original

GB MT

Storage

• Allow the device to cool down for at
least 10 minutes.
• Empty the device.
• Wind the steam hose (14) around the
retaining clips (2) on the boiler tank
(7).
• Store the device in an upright position
in a dry and dustproof location and out
of reach of children.

Replacement parts/Accessories

Spare parts and accessories can be obtained at
If you have issues ordering, please use the contact form.
If you have any other questions, contact the "Service-Center" (see page 24).
Position Manual
2 – 8, 15
14
10 – 13
22
Disposal/Environmental
protection
In accordance with the Directive
2012/19/EU on waste electrical and elec-
tronic equipment, used electrical devices
must be collected separately for disposal
and recycled in an environmentally sound
manner.
Depending on the implementation in na-
tional law, you may have the following
options:
• Return to a shop,
• Return to an official collection point. For
• Return to the manufacturer/distributor.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.
www.grizzlytools.shop
Description
Boiler tank complete
Steam hose
Steam plate complete
Electrical devices do not belong in
domestic waste.
more information, please contact your
local waste management provider or our
service centre.
We will dispose of any defective devices
that you send to us free of charge.
Order no.
91105685
91105686
91105687