High-Pressure Cleaner; Intended Usage - Bruder Mannesmann Werkzeuge 22310 Manual De Instrucciones

O P E R A T I N G I N S T R U C T I O N S

Intended Usage

The high-pressure cleaner is used to clean objects and exterior areas (tools, vehicles,
boats, patios, building exteriors, garden furniture, etc.) with a high-pressure jet of water. It
is not intended for industrial use.
It should be noted that vehicles and their engines may only be cleaned in locations with a
suitable oil trap.
Before using the high-pressure cleaner, you should read and pay
attention to the following safety instructions!
Safety instructions for the high-pressure cleaner:
The unit may only be connected to an electrical supply, which has been installed in

accordance with IEC 60364
The equipment may only be used outdoors!

This unit must be used in upright position only!

The high-pressure cleaner may not be operated by children or people who have not

been instructed on its use.
The equipment may not be operated in an environment where there is a risk of an

explosion.
Never leave the equipment unattended, while the on/off switch (10) is engaged.

The jet (23+24) of the high-pressure cleaner may not be directed at people, animals,

electrical components or at its own workings. Do not allow unauthorised personnel into
the area where you are working.
Never direct the jet (23+24) at yourself, or others, in order to clean clothes or footwear.

Objects containing dangerous substances (e.g. asbestos) may not be hosed down.

Before starting work, specifically check the integrity of the cable (8) and the high-

pressure hose (3).
A damaged trigger gun (10) must be replaced by an approved workshop.

A damaged high-pressure hose (3) must be swapped for a manufacturer's replacement

high-pressure hose before using the equipment.
If the cable (8) is damaged, it must be replaced by a specialised connection cable,

which is available from the manufacturer or their after-sales service.
Do not touch the mains plug of the cable (8) with wet hands.

If needed, only use splash-proof extension cables and ensure that the mains plug and

socket of the extension cable are waterproof. Unsuitable extension cables can be
dangerous.
Pay attention to the impermeability of the feeder hose and its connection to the hose

coupling (9).
The feeder hose and high-pressure hose (3) should not be bent.

Only clean vehicle tyres and valves at a distance of at least 30cm and only using the

fan nozzle.

High-Pressure Cleaner

Item-no. 22310
GB - 10