Care And Service - Bruder Mannesmann Werkzeuge 22310 Manual De Instrucciones

Turn off the water supply and disconnect the equipment from the water supply.

Squeeze the gun trigger (19), until the equipment is depressurised.

Lock the gun trigger (19) with the trigger lock (18).

Disconnect the high-pressure hose from the spray gun by pressing the release button

(20), and remove the tube from the gun by pulling downwards.
Wind the whole of the high-pressure hose back onto the reel (2).

Store equipment in a secure location that is frost-free and out of the reach of children.

Before longer periods of disuse and storage during the winter, allow to run for about 5

seconds without any water supply and with the high pressure hose disconnected. By
doing this, the pump will be emptied of as much of the remaining water as possible,
which will virtually remove the risk of damage due to water freezing inside the
equipment.

Care and Service

Before any cleaning or servicing of the high-pressure cleaner, the mains plug should be

disconnected.
Only clean the casing with a dry cloth and do not use any cleaning agents, as these

may damage the casing.
Remove the dirt filter from the water inlet (9), clean it under running water and re-insert

it into the inlet.
The cleaning needle provided (15) serves to clean the nozzle. After each use of the

high-pressure cleaner, insert the cleaning needle (15) into the nozzle from the front to
dislodge any foreign objects from the nozzle.
Guarantee
This product carries a full 2-year guarantee.
The period of guarantee begins on the day of purchase. The date of purchase can be
verified by sending us the original receipt.
During the guarantee period we guarantee:
Free repair of any defects.

Free replacement of all parts that become damaged.

Inclusive, free, professional service (i.e. free installation by our specialists)

This presumes that the defect cannot be traced back to improper use.
GB - 15