AGDR-200 OUTDOOR WALL SOCKET DIMMER
EN
Read these simple guidelines. Not following them may be dangerous and faulty installation will
invalidate any warranty that may apply to this product.
FUNCTIONALITY
Outdoor wall socket receiver for dimming lights.
TECHNICAL SPECIFICATIONS RECEIVER
Power input
RF frequency
RF range
Memory addresses
If you connect multiple lamps/spots, always use lamps of the same brand and type!
Incandescent lamps and 230V (eco) halogen
12V halogen with dimmable electronic transformer
12V halogen with with iron-core transformer
Dimmable ESL
Dimmable LED
Non-dimmable ESL and non-dimmable LED
Switchstart fluorescent tubes and compact fluorescent lamps
WIRELESS RADIO SIGNAL
• The 433.92 MHz radio signal passes through walls, windows and doors.
• Indoor range: up to 30 m. Outdoor range: up to 70 m. (optimal conditions)
• The range is strongly dependent on local conditions, such as the presence of metals. For example, the
thin metal coating in Low-emissivity (Low-E) glass has a negative impact on the range of radio signals.
• There may be restrictions on the use of this device outside the EU. If applicable, check whether this
device complies with local directives.
1
COMPATIBILITY
The receiver works with all Trust SmartHome
transmitters.
220-240 VAC 50 Hz
433,92 MHz
Up to 30m indoor, 70m outdoor (optimal conditions)
6
Min 20 Watt
Max. 200 Watt
Min 20 Watt
Max. 200 Watt
Min 40 Watt
Max. 200 Watt
Min 3 Watt
Max. 24 Watt
Min 3 Watt
Max. 24 Watt
Not suitable
Not suitable