pellenc HELION 2 Manual De Instrucciones página 52

1. Check the working area (fences, posts, etc.)
2. Turn the rear handle to the correct position.
3. Connect the tool's Fast connector
4. Turn on the battery by pressing the On/Off button.
Note
If at least 1 indicator light on the handle is on, the
tool is powered up.
To start the Helion Alpha hedge-trimmer:
• Hold the front handle
start the tool.
• Keep hold the front handle
ting.
Note
If the control trigger is remains released for more than 5 minutes, repeat the above process to restart the tool.
The Helion 2 hedge-trimmer allows quick connector connection / disconnection if the battery is compatible *.
To activate the function, the battery must remain on (switch on I)
* Ulib 1200 / 1500 / Alpha 260 / Alpha 520 / Olivion
Important
Always start the motor before bringing the cutter bar into contact with the wood
52
ELECTRIC HEDGE-TRIMMER HELION 2 COMPACT
54_117575-J
and pull the trigger twice
and trigger while cut-
to