Operating The Appliance - MSW Motor Technics MSW-M-PAT-1 Manual De Instrucciones

3.2. Operating the appliance

CAUTION! D
petrol, naphtha, fuel oil, etc.
CAUTION!
flammable vapours occur.
ADJUSTMENT OF PRESET PRESSURE
1. Water tank
2. Water inlet
3. Heater
4. Pump
5. Accumulator tank
6. Valve
The accumulator tank is pre-filled with air at 0.7 bar (10 psi). If the pump's inlet pressure
is different, adjust pressure in the tank.
To increase air pressure in the tank:
a) deactivate the pump;
b) open the tap to reduce pressure in the system;
o not use the appliance to pump flammable liquids,
Do not use the pump in hazardous areas or in places where