Blumfeldt Garden Hero Manual De Instrucciones página 63

Push the cover back to its original
position to cover the wires and
connections from water ingress.
4. Laying the boundary wire
Keep the wire straight for at least
the first 2 m. This is to allow the
robot mower to return to the
charging stand with ease.
LED status indicator
Making sure the power is switched
off at the socket, screw the two
charging rods into the holes
just below the cover of the base
station. (Note: This is where the
LED status indicator is situated.)
Place the pegs at intervals of
about 1 m on straight and even
ground, 30 cm to 50 cm on bends
and corners. Uneven ground and
obstacles will require more pegs.
EN
63