Troubleshooting - Blumfeldt Garden Hero Manual De Instrucciones

EN
86

TROUBLESHOOTING

Error message
Mower outside
Mower lifted
Mower tilted
Mower overturned
Mower trapped
Loop signal lost
Motor fault
High temp
Battery abnormal
Cause
The robot mover is
outside the perimeter.
The robot mover is
lifted away from the
ground.
The robot mover is
tilted too much.
The robot mover is
upside down.
The robot mover is
trapped by obstacles.
Power supply or the
wire is not connected
to the station, or wire is
broken.
Blade motor or drive
motor is stuck. The
motor current is too
high.
The battery
temperature is too
high.
The battery is
damaged.
Solution
Place the robot mover
inside the perimeter.
Move the robot mover
to a flat part of the
lawn.
Move the robot mover
to a flat part of the
lawn.
Return the robot mover
to its normal position.
Remove the obstacles.
Check the power
supply, station and
wire are connected
normally. Identify wire
break and repair with
wire splicer.
Clear the grass or soil
in cutting means and
driving wheels. Cut the
high and thick grass
with a conventional
lawn mower.
Wait until the
temperature decreases.
Contact the
manufacturer or the
customer service.