Beta 1438DCT/S Manual De Instrucciones página 9

- Fit the clutch onto the tool (3) and lock it in a vice (fig. 3).
- Lock both the screw and the nut to the clutch (fig. 4).
Caution: Both the screw and the bolt should be tightened by hand.
UNLOCKING CLUTCH 1
- Install the tool (5) and tighten the nut (fig. 5).
Caution: The bolt should be tightened by hand.
- Fit the tool (2) onto the clutch, checking that the three pins have been inserted through the slots (fig. 6,
circled in red).
Fig.3
Fig.4
Fig.5
Fig. 6