Hd Radio™ Tuner - JVC KD-X480BHS Manual De Instrucciones

HD Radio™ Tuner
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit <http://www.hdradio.com>.
Search for a station or channel
1 Press B SRC repeatedly to select FM or AM.
2
Press and hold to select the tuning mode.
• [HD SEEK]: Search for HD Radio broadcast only.
• [MANUAL SEEK]: Search for both conventional and HD Radio broadcasts.
3 Press S / T (or press H / I on the remote control) to search for a
station or channel automatically.
(or)
Press and hold S / T (or press and hold H / I on the remote
control) until "M" flashes, then press repeatedly to search for a station
or channel manually.
Settings in memory
You can store up to 18 stations/channels for FM and 6 stations/channels for
AM.
Store a station or channel
While listening to a station or channel...
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
(for KD-X480BHS)
2
Turn the volume knob to select a preset number, then press the knob.
"MEMORY" appears once the station or channel is stored.
Select a stored station or channel
Press one of the number buttons (1 to 6).
(or)
1
Press to enter HD search select mode.
2
Turn the volume knob to select [PRESET LIST], then press the knob.
3
Turn the volume knob to select a preset number, then press the knob.
Select a HD Radio multicast channel
Many HD Radio stations offer more than one channel programming. This
service is called multicasting.
While receiving HD Radio multicast channels...
Press S / T to select your desired channel (HD1 to HD8).
"LINKING" appears while linking to a multicast channel.
Emergency Alert message
You can receive an emergency alert message while listening to another
source via HD Radio Broadcast.
• To activate/deactivate emergency alert message reception, see [EA] of the
[TUNER SETTING]. (Page 8)
Receive an emergency alert message
When an emergency alert message is received, it appears and remains on
the display until the user performs the "Ignore" function.
Press B SRC (or press SOURCE on the remote control) to ignore the alert
message.
The same emergency alert message will not interrupt again for 12 hours.
7
ENGLISH