UFESA DL3000 ELEGANCE COMPACT Manual De Instrucciones página 33

- Connect the adapter (10) to the device socket (1) and plug it.
Switch on the device by long pressing the power button (3) for 3
seconds. Led lights will be on and the device will be ready for use.
WHEN USING THE DEVICE
- Ensure the device is place vertically and the treatment window
(6) is completely in full contact against the skin. The device only
will flash if it's in full touch with the skin.
- Press the flash button (5) to start hair removal. Do not apply
more than one continuous flashes in the same place. The treat-
ment window creates temporary pressure marks so you can
check which areas you have treated.
- Please carry out test on small area of skin 12 hours in advance to
check for any adverse reactions.
- Press again the flash button (5) to switch off the device once you
have finished the treatment. This device has automatic switch off
after 10 minutes without any operation.
DIFFERENT TREATMENT MODES
You can switch between manual and automatic hair removal mo-
des by long pressing the flash button (5) for 3 seconds.
- Manual mode "Click2Flash" is suitable for small or hard to reach
areas such as underarms, face (females only), bikini line or cur-
ved areas such as knees. Simply press and release flash button
for single flash.
- Automatic mode "Glide2Flash" is more convenient for large
areas such as legs, arms, back and chest. It will automatically go
on flash every 1-3 seconds at different energy levels and automa-
tic mode icon (7) will be shown on the LCD Display (2).
33