Product Specifications - EDM Product 08787 Manual De Instrucciones

• Don't overstretch. Keep your feet firmly on the ground at all
times. This will allow you to maintain control of the power tool in
unexpected situations.
• Dress appropriately. Do not wear loose clothing or jewelry. Keep
your hair, clothing, and gloves away from the power tool. Loose
clothing, jewelry, or long hair can become entangled in moving
parts.
• If there are devices for connecting dust extraction and collection
facilities, make sure they are connected and used properly. Using
these devices can reduce dust-related hazards.

PRODUCT SPECIFICATIONS

Voltage: 40V (2x20V Li-ion battery)
Rated speed: 16,300rpm
Maximum air speed / flow: 275Km/h / 550m
USE AND CARE OF POWER TOOLS
• Don't expect the power tool to do more than it can. Use the right
power tool for what you want to do. A power tool will perform
better and be safer if it is used in the context for which it was
designed.
• Do not use the power tool if the switch cannot turn it on and
off. A power tool with a broken switch is dangerous and must be
repaired.
• Disconnect plug from power source before making adjustments,
changing accessories, or storing power tools. These preventive
safety measures reduce the risk of accidentally starting the power
tool.
• Store power tools, when not in use, out of the reach of children
and do not allow persons unfamiliar with the power tool or these
instructions to use it. Power tools are potentially dangerous in the
hands of inexperienced users.
• Keep power tools. Check for misaligned or binding moving parts,
breakage, or any other features that may affect the power tool's
operation. If it is damaged, the power tool must be repaired. Many
accidents are due to the use of power tools in poor condition.
INFORMATION ON NOISE / VIBRATION
• If the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may
differ. This can significantly increase the level of exposure during
the entire work period.
• An estimate of the level of vibration exposure should also take
into account times when the tool is off or when it is running
but not actually doing work. This can significantly reduce level
exposure during the entire work period.
Instruction manual
SERVICE
Your power tool should be serviced by a qualified specialist using only
standard replacement parts. This will ensure that you meet the required
security standards.
SPECIAL SAFETY INSTRUCTIONS FOR THE BLOWER / VACUUM
CLEANER
/h
3
• Identify additional safety measures to protect the operator
from the effects of vibration, such as: maintaining the tool and
accessories, keeping hands warm, or organizing work patterns.
a) Use only recommended spare parts and accessories
by the manufacturer.
b) Inspect and maintain the machine regularly. have the
machine repaired only by an authorized technician.
c) When not in use, store the machine out of reach of
children.
• Read and understand the operator's manual and observe the
warning and instruction labels attached to the tool.
• Do not force the blower. Use the correct accessory for each
application. With the right accessory you will do the job better
and safer.
• Do not use the blower if the switch does not turn it on or off. Any
blower that cannot be controlled with the switch is dangerous and
must be repaired.
• Disconnect plug from power source before making any
adjustments, changing accessories, or storing the blower. These
preventative safety measures reduce the risk of the blower being
accidentally started.
• Store idle blower out of reach of children and other untrained
persons. Blowers are dangerous in the hands of untrained users.
• Handle the blower with care. Keep cutting tools sharp and clean.
A well-maintained tool, with sharp cutting edges, is less likely to
bind and is easier to control.
• Check for misaligned or binding moving parts, broken parts, and
any other conditions that may affect blower operation. If damaged,
have blower repaired before use.
• Use the blower, tool accessories and bits, etc. In accordance with
these instructions, taking into account the working conditions,
the conditions and the work to be carried out. Using the blower for
operations other than those intended could result in a hazardous
situation.
• Save the instructions. Refer to them often and use them to
instruct others who may use this tool. If you lend this tool to
someone else, please also lend the instructions.
08787
REF.
ES
PT
EN
FR