Tabla de contenido
Publicidad
a FAN indicators
If any of the fans fail, the corresponding fan indicator turns
on red.
b POWER indicators
If either of the AC power supply units fail, the
corresponding indicator turns on red.
c TEMP indicator
If an abnormally high temperature is detected within the
unit, the indicator turns on red.
Rear View
a SYSTEM TC connector
(PWS-100 only) Used to input time information, using a
time code signal, into the unit. Time information can be
used to control frame accuracy. For details, contact your
Sony sales representative.
If a packaged product, such as the PWS-100TD1,
PWS-100MG1, or PWS-100PR1, was purchased, refer to
the operation manual supplied with each packaged
product.
b Remote connectors (1/2, 3/4, 5)
For future function expansion.
c AC power supply units
Insert the power cords and connect to power outlets.
Only one AC power supply unit is installed at the factory.
A second optional power supply unit can be installed to
provide power supply redundancy. When used in systems
that require reliability, a power supply redundancy allows
the unit to continue operating even if a power supply unit
fails.
For details about installing or replacing a power supply
unit, consult your Sony sales or service representative.
1
1
4
5
6
d HDD slots
Houses PWSK-102 optional hard disk drives.
If a packaged product, such as the PWS-100TD1,
PWS-100MG1, or PWS-100PR1, was purchased, refer to
the operation manual supplied with each packaged
product.
For details about adding or replacing hard disk drives,
contact your Sony service or sales representative.
2
3
5 7
8
d PCIe card slot
Insert a PCIe card into this slot for feature expansion.
If a packaged product, such as the PWS-100TD1,
PWS-100MG1, or PWS-100PR1, was purchased, refer to
the operation manual supplied with each packaged
product.
For details about adding or replacing PCIe cards, contact
your Sony service or sales representative.
e USB connectors (rear panel)
Connects to USB devices.
Note
• Of the four USB connectors on the rear panel, only the
bottom right port supports power delivery (900 mA).
The other three ports do not support power delivery, and
should be used to connect USB devices that do not
require power supplied from the USB connector.
• Use SuperSpeed USB cables.
17
Name and Function of Parts
Publicidad
Tabla de contenido
