Rollei Pocket Bi-Color Manual página 18

Operation
18
Adjustment of Brightness and Colour Temperature
– After the device has been started, press the power / mode button
shortly to switch between the modes colour temperature and
luminance output.
– Adjust the value of each mode by pushing the + or – button (value
adjustment button), to increase or decrease the value. You can also
hold the button and the value will be changed fluently.
– The colour temperature can be adjusted from 3,100 K up to 5,500 K
by increments of 100.
– The brightness can be adjusted from 1% up to 100%
(increments: 1%, 2%, 3%, 4%, 5%, 10%, 15%, ...).
Note on Charging the Rollei Pocket Bi-Color:
– The Rollei Pocket Bi-Color is equipped with two charging ports. But
it is only needed to insert one kind of charging cable while charging.
To use two charging cables at the same time for charging is not
possible.
– When charging the Rollei Pocket Bi-Color, use power adapters with
an output of 5 V
– Do not use Quick Chargers and USB Power Delivery (USB-PD)
chargers to charge the Rollei Pocket Bi-Color.
– Only use the supplied USB-C and Micro-USB cable to charge the
device. Otherwise there is a risk of fire or electric shock.
– The Rollei Pocket Bi-Color can be used while charging.
2 A.
ENGLISH