Worldcast Systems HQSound PROCESSOR Guía Rápida página 6

English version
o Add the IP address and the sub-network mask.
 With Windows Vista or 7, go to:
o Control panel / Network and Internet / Network and
o Click on "View Status" for your local area connection, and
o Click on Internet Protocol 4, then on Properties.
o Add the IP address and the sub-net mask. (for example
5. Installing the remote applications
1. Remote applications can be downloaded from the
HQSound PROCESSOR embedded web site. Open
your web browser (Internet Explorer, Mozilla...)
and enter the IP address you just set via the front
panel.
The default login and password are:
Admin / admin
2. Go to the "Download" page.
3. Click on the various links to install the HQSound PROCESSOR applications:
 HQSound PROCESSOR, main application: RDS application, audio backup, transmitter
configuration and system configuration.
 HQSound PROCESSOR Sound Process: sound processing and input management application,
 ScriptEasy: automation application
 MasterView: end-user viewing tool.
4. Follow the wizard's instructions.
5. To launch one of the applications use desktop shortcuts or go to Start/Programs/Audemat*/Radio all
in one.
Note: the HQSound PROCESSOR Sound Process application can be launched from the Radio all in one
application.
* ScriptEasy and MasterView applications can be found in the WorldCast Systems folder
If Windows Firewall is activated, add these applications to the list of approved applications.
6
(for example 192.168.17.56/ Netmask 255.255.0.0)
Sharing Center.
on Properties
192.168.17.56 / Netmask 255.255.0.0)