Radio Reception; Usb Device Playback - Sony CDX-G1380UM Manual De Instrucciones

The display disappears while the unit is
operating.
 [BLK OUT] (black out) is set to [B.OUT-ON]
(page 12).
The display/illumination flashes.
 The power supply is not sufficient.
– Check that the car battery supplies
enough power to the unit. (The power
requirement is 12 V DC.)
The operation buttons do not function.
The disc will not eject.
 The connection is not correct.
– Press DSPL and EQ for more than
2 seconds to reset the unit (page 6).
The contents stored in memory are
erased.
The clock set automatically is not accurate.
 The clock data on radio waves is not
accurate.
– Set the clock manually (page 7).

Radio reception

The radio reception is poor.
Static noise occurs.
 Connect the antenna (aerial) firmly.
The stations cannot be received.
 The tuning step setting has been erased.
– Set the tuning step again (page 6)
(except for Argentine models).
RDS
PTY displays [- - - - - - - -].
 The current station is not an RDS station,
or the radio reception is poor.
CD playback
The disc does not play.
 Defective or dirty disc.
 The CD-R/CD-RW is not for audio use
(page 14).
MP3/WMA files cannot be played.
 The disc is incompatible with the MP3/
WMA format and version. For details on
playable discs and formats, visit the
support site on the back cover.
MP3/WMA files take longer to play than
others.
 The following discs take a longer time to
start playback.
– A disc recorded with a complicated tree
structure.
– A disc recorded in Multi Session.
– A disc to which data can be added.

USB device playback

A USB device takes longer to play.
 The USB device contains files with a
complicated tree structure.
The audio file cannot be played.
 For details on supported formats, see
"Specifications" (page 15).
If the audio file still cannot be played, refer
to the operating instructions supplied with
the USB device, or contact the
manufacturer of the USB device.
Operations for skipping an album,
skipping items (Jump mode), and
searching a track by name (Quick-
BrowZer) cannot be performed.
 Set [USB MODE] to [MSC/MTP] (page 11).
The sound cannot be output during
playback in Android mode.
 Check the status of the audio playback
application on the Android smartphone.
17
GB