Zeiss Colibri 5 Manual Breve página 6

ZEISS
4 NOTES ON WARRANTY
The manufacturer guarantees that the instrument is free of material or manufacturing defects upon
delivery. Any defects must be reported immediately and steps taken to minimize damage. If such a defect
is reported, the instrument manufacturer shall be obliged to correct the fault, either by repairing the
instrument or replacing it with a new one, at the manufacturer's discretion. No warranty is given for
defects caused by natural wear and tear (particularly of wearing parts) and improper use of the
instrument.
The instrument manufacturer shall not be liable for damage caused by misuse, negligence or any other
tampering with the instrument, particularly the removal or replacement of instrument components, or
the use of accessories from other manufacturers. Such actions shall invalidate any warranty claims.
With the exception of the work described in this quick reference guide, no maintenance or repair work is
to be carried out on the Colibri 5/7. Repairs may only be performed by ZEISS Service or individuals
specially authorized by ZEISS Service. In the event of a problem with the instrument, please contact your
local ZEISS representative.
5 INTENDED USE
Colibri 5/7 is designed to be used as a light source for reflected light fluorescence applications.
It can be used in connection with the following upright microscopes:
Axio Imager
−
Axio Examiner
−
Axioplan 2
−
Axioskop 2
−
Axioskop 2 FS
−
Axioskop 40
−
Axio Scope.A1
−
Axio Scan.Z1 (digitizer)
−
and with the following inverted microscope:
Axio Observer 3, 5, 7
−
4
NOTES ON WARRANTY
423052-6044-008
Colibri 5/7
09/2017