Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1
Insert two Guide rods (18) into the holes of the Rear Stabilizer(4) separately and secure them with 2
Allen Bolts M10x20 (63) and two Washers Ø10 (69). Slide the two Rubber bumpers (48) along the guide
rods separately.
Attach the Base Frame (1) to the Rear Stabilizer (4) as the diagram shows and secure them with two
Bolts M10x70 (58), 1 Bracket (29), 2 Washers Ø10 (69) and 2 Lock nuts M10 (68).
9
Publicidad
Tabla de contenido
