Nostalgia Electrics SNP14 Manual De Instrucciones página 14

Your RETRO KETTLE POPCORN MAKER™ features a
window and a warming light. A measuring spoon for oil
and a measuring cup for popcorn kernels is included
so that every batch of popcorn pops perfectly. Your
unit has a kernel catcher and is easy to use and easy
to clean!
The RETRO KETTLE POPCORN MAKER™ is only desi-
gned in appearance to look like the retro style of the
1950s, however, it is a technologically advanced kettle
popcorn maker that makes hot, fresh, theater style
popcorn every time – anytime!
USING YOUR RETRO KETTLE
POPCORN MAKER™
The RETRO KETTLE POPCORN MAKER™ is easy to
use, just follow these simple instructions.
AFTER TAKING THE UNIT OUT OF THE BOX
- Before first use, wipe the inside of the unit clean with
a non-abrasive moist sponge, towel or cloth and then
wipe with a non-abrasive towel to dry.
- Wipe clean the inside of the kettle and be sure it is
properly placed in the brackets before starting. Plug
in kettle plug.
- Your RETRO KETTLE POPCORN MAKER needs
little assembly. The Stainless Steel kettle needs to be
securely inserted in the support brackets hanging from
the top inside the unit. The side of the kettle with the
inverted threads needs to be on the right side of the
machine. This is the same side with the small round
hole in the glass. This is where the crank handle will
enter to screw in and connect to the kettle. (See page
3, Illustration A for positioning of crank handle.)
- Now you are ready to enjoy fresh, hot and tasty thea-
ter style popcorn from your RETRO KETTLE POPCORN
MAKER™.
USING YOUR RETRO KETTLE POPCORN MAKER™
1. First, find a flat surface near an electrical outlet
before starting. (Make sure your cord is away from
any water source. If needed, it is acceptable to use
an extension cord.)
Gather your popcorn making supplies; popcorn, seaso-
nings, bowls or bags for holding the popcorn, cooking
SNP14-IM.indd 14
oil, measuring cup and spoon. (Measuring cup and
spoon are included with your unit).
2. Plug in your unit in the OFF position.
3. Make sure kettle is properly secured in support
brackets.
4. Make sure kettle motor is plugged in.
5. Turn unit ON by flipping the switch on the top of
the machine. (See Illustration A below for location of
switches). Allow the unit to run 3-5 minutes to heat up
kettle. Turn unit OFF.
CC
- AA. On/off and light switches
- BB. Kettle
- CC. Crank handle connects to kettle from outside
6. By using the oil-measuring spoon supplied with your
RETRO KETTLE POPCORN MAKER™, add 2 teaspoons
of your favorite popcorn cooking oil to the kettle.
7. Add one measuring cup of popcorn kernels to the
kettle.
8. Turn the unit ON, and close the door. In no time at
all, you can hear the popping begin. Fresh, hot popcorn
will begin to burst out of the flip lids on the kettle - just
like at the theater!
9. When the popping sound becomes infrequent or
stops completely, turn the unit OFF. Flip the kettle over
with the crank handle to empty the kettle. Repeat
steps 6 thru 8 until desired amount of popcorn has
been popped.
10. Now, your popcorn is ready to eat!
There are many ways to enjoy your new Popcorn
Maker, including:
- Theater style popcorn – add butter and salt
14
AA
BB
06/04/2016 21:06