RÉPULSIF ÉLECTRONIQUE POUR ANIMAUX ET GIBIER
Instruction manual
Art.-No. 60035
Dear client,
thank you for choosing one of our quality products. In the
following, we will explain the functions and operation of our
product. Please take the time to read through the instruc-
tions carefully. Please take some time to read through the
instructions carefully. Please note all the included safety and
operating instructions. Keep this manual safe and ensure
that you include it when passing on the product on to a third
party. If you have any questions or suggestions about this
product, please contact your supplier or our service team.
We would appreciate it if you would recommend us to others,
and we hope you enjoy using this unit.
1. Scope of delivery
• 1 Deterrent unit
• 1 Battery case
• 1 Fully moveable fixing system, comprising a clamp and a
swivelling arm
• 1 Operating manual
• 1 Standpipe (art. no. 60032)
2. Product description
This newly-developed animal deterrent device offers you a
modern electronic solution to the problem of bothersome
animals on your property or in your garden. Thanks to the
modern portable design including accessories, the deterrent
device can be installed in virtually any place in your house
or garden, even in places where there is no mains electricity
supply. The deterrent device protects your house and garden
around the clock in an environmentally-friendly manner, with
no chemicals, health hazards or odours. The deterrent device
uses extremely high frequency or ultrasonic sound to scare
off dogs, cats, rabbits and other wild animals.
3. E xplanation of diagram
1. L oudspeaker: emits a high frequency or ultrasonic sound
to scare off pests and animals.
2. P IR movement detector: generates a signal to trigger the
output circuit when the passive infrared movement sensor
detects the movement of pests or animals within the de-
tection range. It will be reset for the next detection.
3. F unction selector switch: Three selectable functions:
"M/S/CON/OFF"
"OFF" – Switches off the unit.
"CON" – Continuous emission if the AC adaptor is used, or
intermittent emission (0.5 sec "ON") if battery operation
is used.
4. F requency selector switch:
Three frequency ranges, "H/M/L " can be selected
"H" – high frequency sound
"M" – medium frequenc sound
"L" – low frequency sound
5. T est button: Used to check whether the signal is being
emitted.
6. L ED indicator: The LED indicator lights up if the high fre-
quency or ultrasonic sound is being emitted.
7. 1 2 V DC input: Input for the connection of the 12 V DC out-
put of an AC adaptor 230 V~/ 12 V approx. 300 mA.
8. 6 V battery input: Input for connecting the plug from the
battery case.
1
6
5
7
Status: 05/17
2
4
3
8
5