Installing Strike Plate And Box - ZKTeco ZL700 Guia De Instalacion

Connect the cable of Battery Box with Transfer Cable, put in 4 Alkaline AA batteries,
3)
and insert the Battery Box into Indoor Unit.
Secure the Battery Box and Indoor Unit with 2 Screw E.
4)
Hex Wrench B Screw E

Installing Strike Plate and Box

7
Make sure that the Strike Box is aligned with the latch bolt. Then, use the Installation
1)
Template to drill holes.
Align the Strike Plate and Box with the drilled holes and secure them with Screw B.
2)
Screw B
7