Uline SHARK ROTATOR H-10108 Manual De Instrucciones página 2

OPERATING ISSUE
Vacuum turns off on its
own.
If the troubleshooting section does not resolve your problem, contact Uline Customer Service at 1-800-295-5510.
PAGE 2 OF 6
TROUBLESHOOTING CONTINUED
CAUSES
Vacuum is equipped with a
motor protective thermostat.
If vacuum overheats, the
thermostat will automatically
turn the unit off.
1-800-295-5510
uline.com
RECOMMENDATIONS
To restart the thermostat:
1. Turn the unit off.
2. Unplug the vacuum.
3. Empty the dust cup and clean filters.
4. Check for blockages in hose,
accessories and inlet openings.
5. Allow the unit to cool for a minimum of
45 minutes.
6. Plug in the vacuum.
7. Restart the unit using either the POWER
or BRUSH ROLL button.
0722 TH-8041