Fenton NASHVILLE Manual De Instrucciones página 7

PLAYING FROM USB DRIVE
1. Connect a USB device containing MP3 files or MP3 player to the USB port (make sure that the usb device is fat32
formatted).
2. Press CD/USB or MODE until the USB indicator appears on display to select the USB mode.
3. Adjust the volume to the desired level.
4. Select desired track with PREV/NEXT button.
5. Press PLAY to play/pause playback.
6. Pres STOP to stop playback.
Repeat playback:
Press REPEAT to select one of the following playback modes: single repeat, repeat album or repeat all.
Random playback
Press RANDOM to play randomly, press RANDOM again to cancel.
Removing the USB Device
Make sure to stop playback and turn the unit OFF before removing the USB device to avoid damaging the USB drive and record
player.
PLAYING VIA BT
1. Press the MODE button to enter the BT mode.(BT mode will appear on the display)
2. Select "Fenton recordplayer" on your BT device and pair. A sound will be emitted to confirm the
pairing is successful.
Attention: BT distance is approx. 10meter without any barrier.
RECORDING BT
1. Insert the USB stick/cable in to the USB port (make sure that the USB stick is fat32 formatted).
2. Follow the same procedures as with the ''Playing via BT'' section. Press the USB/REC button (the ''REC'' icon appears on
the display). The display will show ''Please wait...'' for a few seconds, then the ''REC'' icon will flash on the display. The unit
will start recording.
3. Press STOP to stop recording, ''End recording'' will appear on the display.
4. To listen to the recording, repeatedly press the CD/USB or mode button to select the USB mode. The USB indicator appears
on the display. Press the PREV/NEXT buttons to select the latest file on the USB-drive to play.
7