ABC Design Carry Soft Manual De Instrucciones página 6

• Soft carrycot
• Weight: 1.6 kg
• Tested for conformity with EN 1466:2004 + A1:2007
Care instructions
• The materials used to manufacture our products comply with the AZO requirement, EN71-2
and EN71-3, and light fastness standards for textiles. Nevertheless, we advise you not to leave
the product exposed to bright sunlight for any length of time. No claims may be made for
wear and tear or if the colours fade when exposed to strong sunlight. The fabric covers on this
product can be washed by hand or on a cold cycle in the washing machine (mild detergent).
• Regular care and upkeep have a major part to play in maintaining the safety and value of the
product.
Safety instructions
Read these instructions carefully before use and keep them for future reference. Failure to read
these instructions may compromise the safety of your child.
ATTENTION:
• For use on a firm horizontal surface only.
• Do not use spare parts other than those supplied or approved by the manufacturer.
• Be aware of the risks posed by naked flames and other sources of heat, such as electric
heaters, gas flames, etc., which are in the immediate vicinity of the carrycot.
• Check the handles and base regularly for damage and signs of wear.
WARNING:
• This product is designed to hold one baby who cannot sit up.
• Do not leave other children unsupervised in the vicinity of the carrycot.
• Do not use the carrycot if parts are broken, ripped or missing.
• If the carrycot is mounted on the pushchair check before use that the cot is
correctly secured in place.
• Do not make any modifications to the product which compromise its safety.
• Never leave your child unattended.
• Never place the carrycot on a stand.
• Do not use the carrycot with an additional mattress.
Customer complaints
• No claims may be made for natural wear and tear or for damage caused by undue demands on
the product or by exceeding the permissible load.
• No claims may be made for damage caused by improper use.
• No claims may be made for damage caused by incorrect assembly or operation.
• No claims may be made for damage caused by improper modifications to the product.
• Mildew is likely to appear on textiles which are not dried out after getting wet and cannot be
attributed to shortcomings in production conditions.
• The product may fade if exposed to sunlight, perspiration and detergents, or if subject to
abrasion or excessive washing, therefore fading cannot be attributed to a fault with the
product.
EN - 03