Blumfeldt Empoli Manual De Instrucciones página 16

EN
ASSEMBLY
Step 1
Place the stand on a flat and water-resistant surface.
Step 2
Place the large bowl in the lower large ring, the three 'pots' in the middle rings
and the jug in the upper ring.
Step 3
Run the hose from the large bowl through the small rings to the top of the
jug. Guide it through the stopper and, together with this, into the jug (see
illustration).
Step 4
Fill the large bowl and jug with water (the pump must be completely
submerged.
16