System Alarms - Optimus IF-7W60DCETH Manual De Instrucciones

3. Click on Network.
4. Modify the desired
network settings
Netmask and Gateway)
and click the Change
Network Settings button
to apply the changes.
The equipment will restart
automatically.

6. SYSTEM ALARMS

The equipment has several alarm systems that indicate that a failure has occurred in any element of the public address system:

GENERAL FAULT indicator light: Front yellow LED. It lights up when the equipment receives one or more alarms from the
system, or when it generates an alarm itself.

SYSTEM FAULT indicator light: Front yellow LED. It lights up when the equipment detects an internal error.

Audible alarm indicator (buzzer): Intermittent beep. The equipment has a buzzer that generates an acoustic indication each
time it receives an alarm. The acoustic indication, a beep of 10 seconds duration, is repeated periodically every 20 seconds. The
buzzer can be activated or deactivated via the Call Point or Call Point Configurator software.
It is possible to activate the buzzer for the SYSTEM FAULT alarm. To do this, set the internal jumper JP1 to the ON position.
IF-7WDCETH version 5.2.001 ENG
IF-7WDCETH
4ETH
(IP,
Class D wall-mounted amplifier
with IP connection
19