GRAPHITE 57G100 Instrucciones De Uso página 10

DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual:
1. (-) button, press and hold to play previous track, press shortly to
decrease volume.
2. (+) button, press and hold to play next track, press shortly to
increase volume.
3. Function switch button, receiving signal from Bluetooth®, TF
card and FM radio.
4. Switch, press and hold to switch on/off the device. Press shortly
to play/stop a track or answer/end a phone call.
5. TF card slot.
6. Charging socket, 5 VDC.
7. Audio socket.
* Differences may appear between the product and drawing
CHARGING
The speaker has integrated 4500 mAh batteries. It is recommended
to charge them fully on the first charging. Red indicator diode lights
up when charging. When the charging is over, the red diode turns
off. When the speaker is not used for a long time, recharge the
battery monthly to extend the battery life.
HOW TO PAIR WITH A BLUETOOTH® DEVICE
1. Press the button (4) to switch on.
2. Switch on Bluetooth® connection in your phone or another
sender device, pair the device with the speaker „57G100".
INSTRUCTION FOR SETTING RADIO STATIONS
1. Turn on the speaker.
2. Shortly press the button marked with a book symbol to switch
the speaker to FM mode.
3. Press the button marked with a book symbol and hold to start
automatic search.
4. The speaker will be searching whole bandwidth for
approximately 1 minute and will remember detected radio
stations.
5. Press button "+" and "-" for a while to switch between
configured stations.
MAINTENANCE
Use clean, damp cloth for cleaning to remove dust. Do not use
caustic or volatile substances to clean the device. Do not clean the
speaker when charging, do not expose it to low or high
temperature.
9